Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Group 2 / 3
(For children from 15-36 kg)
•
1
Loosen the belt, thread the belt system and
the padding out of their metal brackets on
the back of the child car seat and guide
them through the child car seat to the front.
•
Remove the shoulder pads and belt buckles
from the belt.
•
Fold the belt together so that it can be stored
behind the cover in the recess on the backrest.
•
To remove the belt buckle, thread the belt
through the H-shaped attachment point.
•
Keep all removed parts in a safe place.
•
2
Place the child car seat on the car seat and
place it in the forward facing position.
•
Press both side Isofix connector buttons to
extend the Isofix connectors in length.
•
Insert the Isofix connectors into the insertion
aids and press until they click into place.
•
The display on both sides only turns green
when the connections are made. Pull the
child car seat towards the backrest until it
stands securely.
•
3
Place the child in the child car seat.
•
Adjust the height of the headrest so that
the red seatbelt guide under the headrest
remains free.
•
Guide the car's seat belt through the red
belt guide under the headrest of the child
car seat.
•
Make sure that the lap belt runs through the
side of the child car seat.
•
Make sure that the lap belt in particular is
tight and runs as low as possible over the
child's pelvis.
•
Close the 3-point safety belt with the buckle
on the car seat. Take care that the 3-point
safety belt is not twisted.
•
Pull the vehicle's 3-point safety belt as tightly
as possible and check that the child car seat
is securely positioned.
- 26 -
Publicité
Table des Matières
