Teamtex ZY SAFE Premium ONE 360 Manuel D'utilisation page 25

Installation variant: 3-point belt
•
1
Place the child car seat on the car seat and
adjust it to the forward facing position.
•
Guide the 3-point seat belt of the car th-
rough the rear shoulder belts and through
the belt guide of the child car seat. Close the
buckle of the car's 3-point seat belt.
•
Make sure that the shoulder belt runs over
the upper part of the backrest of the child
car seat.
•
Make sure that the lap belt runs through the
side of the backrest.
•
Make sure that the seat belt is not twisted.
•
Tighten the car seat belt as much as possible
and check that the seat is securely seated.
•
2
Unlock the buckle of the child car seat and
place the straps on the outside of the seat.
•
Place the child in the child car seat.
•
Adjust the height of the headrest so that the
shoulder belt remains free.
•
Close the belt buckle again until you hear
a „click".
•
Pull the front adjustment belt to tighten
the belts. Make sure that the belts are not
twisted.
•
Adjust the shoulder pads so that they lie com-
fortably on the child's chest and shoulders.
•
3 Please remove the baby pad under the
comfort pad in the forward position.
•
The comfort insert is for children from 9-13 kg.
•
Depending on the size of the child, the com-
fort insert can be removed as soon as the
child weighs between 13-18 kg.
- 25 -
The safety belt
of the car runs
through the belt
system and be-
hind the comfort
insert.
EN