ION Total PA Guide D'utilisation Rapide page 6

Masquer les pouces Voir aussi pour Total PA:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Media Panel
Media Panel functions:
Switches modes from Bluetooth,
MODE
FM radio, SD, USB, and Aux.
Play/Pause the USB, SD, or
Bluetooth source. Press and
hold Play/Pause for 2 seconds
to begin the preset auto-store
function. This jumps to the
lowest station (87.5) and then
travels through the bandwidth to
auto-store the strongest stations
as presets.
Repeat the current playing USB
or SD track (ONE), repeat all of
the tracks (ALL), or shuffle the
track order (Pd0).
Navigates through USB and SD
tracks. Plays the previous USB,
SD, or Bluetooth* track, or tunes
the radio down one preset when
pressed once. Hold the button
down to seek back through radio
stations.
Plays the next USB, SD, or
Bluetooth* track, or tunes the
radio
pressed once. Hold the button
down to seek forward through
radio stations.
* Note: In some apps, pressing the Prev or Next buttons may go to another playlist or music genre.
Media Panel Remote:
Note: Aim the remote straight at the front of the speaker woofer. Room lighting and battery life can affect the
operating range of the remote control.
Note: In order to use the remote control for the first time, first pull out the tab attached to the battery
compartment. To change the remote battery, follow the diagram located on the back of the remote. Use a 3V
DC CR2025 lithium button cell battery for replacement.
1.
Stop - Stops the Media Panel source from playing.
2.
Mode - Selects the Media Panel source: USB, SD, Bluetooth, or FM radio.
3.
Mute - Silences the music playback on Media Panel sources.
4.
Prev - Goes to the previous USB or SD card track. When listening to
Bluetooth sources, pressing Prev in some apps may go to another playlist or
music genre. When listening to the FM radio, press the Prev button once to
skip back through the FM stations and hold the button down to seek back
through the channel presets.
5.
Next - Advances to the next USB or SD card track. When listening to
Bluetooth sources, pressing Next in some apps may go to another playlist or
music genre. When listening to the FM radio, press the Next button once to
tune the radio down one preset and hold the button down to seek forward
through the channel presets.
6.
Play/Pause - Plays or pauses the USB, SD, or Bluetooth Media Panel source. Press and hold
Play/Pause for 2 seconds to begin the preset auto-store function. This jumps to the lowest station
(87.5) and then travels through the FM band to auto-store the strongest stations as presets.
Note: Files are played from the USB or SD source first by alphabetical order of what is on the root
level, then alphabetical by folder, and then alphabetical by the track name.
up
one
preset
when
6
2 3
1
STOP
MODE
MUTE
4
6
5
7
EQ
9
8
0
100+
200+
10 11
11
2
3
1
10
4
5
6
7
8
9
12
12

Publicité

Table des Matières
loading

Table des Matières