Plantronics CT10 Guide D'utilisation page 16

SPECIAL BUTTONS
MEM (MEMORY)
TO STORE NUMBERS
The In-Use Indicator Light
Talk/Hang Up Button
Press the Mem Button
Press the Mem Button
Telephone Keypad that you want to assign for that number.
You can repeat the process for storing numbers until the 10 single
numbers on the keypad are used up.
TO CHANGE STORED NUMBERS
To change a number stored in memory, simply store a new number in
that memory location.
TO DIAL STORED NUMBERS
Press the Talk/Hang Up Button
light up.
When the dial tone is heard, press the MEM Button
desired single digit (0-9) memory location button.
The stored number you have selected will be automatically dialed.
TO DIAL A STORED NUMBER DURING A CALL
The memory/recall function also works when additional numbers are
required during the call such as a numeric password. At the
appropriate time during the call press Mem
rapidly transmit the stored numbers.
should be off. If it is not off, press the
once to shut it off.
followed by the numbers you want to store.
followed by the one digit number (0-9) on the
. The In-Use Indicators
11
and
, then press the
and the assigned key to
G
G
will
G
G