Make A Call; Receive A Call - Plantronics CT10 Guide D'utilisation

STEP 2

MAKE A CALL

Before using your cordless telephone, put the headset on and adjust it
as needed.
To make a call, press the Talk/Hangup Button
The In-Use Indicator
When you hear dial tone, enter the number you want to call.
To disconnect a call, press the Talk/Hangup Button
STEP 3

RECEIVE A CALL

Set the Ringer Switch
To answer a call press the Talk/Hangup Button
Indicator on the Remote and the In-Use Indicator (Talk)
Base will light.
When you press any button on the Remote, a short sound will be heard
indicating that the Base has accepted the command.
Three short warning beeps indicate that you are out of range, or there
is too much interference.
If there is interference, move closer to the base before you press any
key. If interference is severe, the Remote might lose communication with
the Base and the call might be disconnected.
This does not happen often, but if it does, return the Remote to the
Charging Well for a few seconds.
will light.
on the Remote
9
on the Remote
.
to the ON position.
. The In-Use
on the
F
.
G
G