Using The Kitchen Timer; Hot Surface Indicator Light - GE Monogram ZHU30 Manuel Du Propriétaire

Using the
kitchen
timer
Hot surface
indicator
light
16
NOTE: Use the kitchen timer to measure cooking time
or as a reminder. The kitchen timer does not control
the cooking elements.
1 Touch the Timer ON/OFF pad.
2 Touch the (+) or (-) pad to choose the desired
number of minutes. When the (+) or (-) pad is held
for several seconds, the timer will increase or
decrease at a faster rate. The timer will
automatically start to count down the minutes
you have selected within 5 seconds of the last
entry. The display will show the minutes and
.
a " " will flash.
3 The timer displays minutes remaining until it
reaches one minute. At one minute, the timer
will beep and start counting down seconds.
With one minute remaining, the timer will beep
every 10 seconds. When all time has counted
down, the timer will signal a long beep and the
display will become blank.
Touch the ON/OFF pad to turn the timer off at any
time. Touch (+) or (-) to add or subtract to the set
time.
A HOT SURFACE indicator light (one for each cooking
element) will glow immediately when any element is
activated. The indicator light(s) glow when the glass
surface is hot, and will remain on until the surface
has cooled to a temperature that is safe to touch.
Using Your Cooktop
Induction Cooktop