Party Light & Sound PARTY-DISCO1 Manuel D'utilisation page 3

EN
Description of the Control panel
1. Power ON/OFF
2. AUX/5V: Charging port for the built-in battery.
Connect the mini USB connector of the charger lead to
this connector and the USB connector to a USB port on
a PC.
AUX input: Connect the mini USB connector of the
charger lead to this connector and the 3.5mm Jack to
the headphones connector of a PC, MP3 player, smartphone or Walkman.
3. USB port: Connect a USB source to this connector and enjoy music in MP3 format.
4. TF port: Connect a micro SD card and listen to music in MP3 format.
5. MP3 controls: Short slide to the left: Select previous song in TF, USB or Bluetooth mode; go to previous radio
station in FM mode. Long slide = volume reduction.
Short slide to the right: Select next song in TF, USB or Bluetooth mode; go to next radio station in FM mode. Long
slide = volume increase.
Short click in the middle: Play, pause, or automatic search for frequencies in radio mode.
Long click in the middle: to switch mode among FM, TF CARD, USB, Bluetooth and audio input.
BLUETOOTH CONNECTION
1. Power on the speaker. The blue LED will blink.
2. Select PARTY-DISCO in the list of found devices.
3. The device will automatically pair.
Specifications
Speakers
Output power:
Frequency range
S/N ratio
THD
Micro USB input
Battery
Dimensions:
Weight
The product design and specifications may be changed without prior notice!
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your
local authorities or your dealer about the way to proceed.
PARTY-DISCO1
1 x 3"/8cm
10W
800mAh DC 3.7V lithium-ion battery
112 x 85 x 155mm
0,336kg
PARTY-DISCO2
2 x 3"/8cm
20W
100Hz - 20kHz
>80dB
<1%
5V/800mAh
112 x 85 x 255mm
0,56kg
PARTY-DISCO4
4 x 3"/8cm
40W
112 x 85 x 455mm
0.952kg
3