Installation; General - Kemper 130 Instructions D'installation Et D'utilisation

2

Installation

2.1

General

Install the valve into flow direc-
tion; see flow direction arrow on
the housing.
Because of contents or larger
particles suspended in the water,
it is recommended, especially
for older pipe-systems, but also
in case of first start-ups, to flush
out the system extensively to be
able guaranteeing design-con-
form operation of the regulating
valves.
18/88 – K410054000001-00 / 03.2021 – © www.kemper-olpe.de
Note!
The integrated
shut-off spindle must
always be turned left
up to the end position
for correct function of
the regulating valve.
Note!
The minimun depth for
concealed installation
from the pipe centre
line is 56 mm.