Working Advice; Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Application Service - Bosch GSG 300 Professional Notice Originale

12 | English

Working Advice

Pull the plug out of the socket before carrying out any
u
work on the power tool.
Switch the power tool off immediately if the saw blade
u
becomes blocked.
Base plate with sliding rollers
You can use the power tool with or without the base
plate (4).
The base plate is equipped with sliding rollers to enable the
saw to be moved easily and make cuts at right angles.
If you want to cut the material to any shape or make small
cutouts, remove the base plate.
Cutting foam
Saw with moderate feed when making precise cuts, espe-
cially in soft foams and similar materials. Do not press down
too hard on the material or stretch it excessively while work-
ing.
To make small cutouts, remove the base plate (4). Use a
knife or a pair of scissors to make a hole in the material,
place the saw blade guide (2) in the hole and saw the cutout.
To make large cutouts, make the hole large enough to ac-
commodate the saw blade guide (2) with the base plate (4)
attached. Ensure that there are no obstacles in the surface
underneath. Saw along the cutout line, applying moderate
pressure.

Maintenance and Service

Maintenance and Cleaning

Pull the plug out of the socket before carrying out any
u
work on the power tool.
To ensure safe and efficient operation, always keep
u
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
Clean the saw blade guide (2) and the saw blades (3) at reg-
ular intervals (approx. after every 8 hours of operation).
You will need to remove the saw blades (3) from the power
tool to do this. It is best to clean the saw blades with white
spirit.
Use a scraper to clean the saw blade guide (2) if necessary.
Lightly oil the saw blade guide before fitting new or re-
sharpened saw blades.

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
1 609 92A 4VD | (19.06.2019)
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch-pt.com.au
www.bosch-pt.co.nz
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
E-Mail: bsctools@icon.co.za
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: (031) 7012120
Fax: (031) 7012446
E-Mail: bsc.dur@za.bosch.com
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Bosch Power Tools