Stanley STHT1-77366 Mode D'emploi page 6

User Manual
GB
6
Installing Your Smart Measure Pro App
1. The Smart Measure Pro app is available for
download from the App Store or Google Play.
2. On your device, launch the App Store or Google
Play.
3. Within the search box, search for Stanley
Smart Measure Pro.
4. Follow the instructions to download and install
the app on your device.
5. Once installed, the Smart Measure Pro app icon
will appear on your device's screen.
6. Proceed to Pairing Your Smart Measure Pro to get
started.
Pairing Your Smart Measure Pro
NOTE:
The LED indicator shows the status of your Smart
Measure Pro:
Blue fl ashing: Smart Measure Pro
discoverable over Bluetooth
Blue on: Smart Measure Pro connected to
device
Green fl ashing: Smart Measure Pro charging
Green on: Smart Measure Pro fully
charged
Off: Power off
1. Turn on Bluetooth on your device.
2. On your Smart Measure Pro, press the Power
button.
• The LED indicator fl ashes blue indicating that
the Smart Measure Pro is discoverable over
Bluetooth.
• If the LED indicator remains off, Smart
Measure Pro may need charging.
3. On your device, tap on the Smart Measure Pro
app to launch it. The main menu should appear
after the app starts.
4. Tap the NO DEVICE CONNECTED button.
The app will display any nearby Smart Measure
Pro units available for pairing.
If no unit appears, ensure that the Smart
Measure Pro unit's LED indicator is fl ashing blue
(see Step 2).
5. When your Smart Measure Pro unit appears, tap
on it to pair it with your device.
This step is necessary the fi rst time you use Smart
Measure Pro. For subsequent uses, your Smart
Measure Pro will automatically be paired with
your device.
Centering the Smart Measure Pro Laser
Before using your Smart Measure Pro, you need to
ensure that the laser is aligned with the camera on
your device. The Smart Measure Pro app contains
a detailed instruction tutorial on this procedure under
SETTINGS: Align Laser.
1. In the Smart Measure Pro app, tap on SETTINGS,
then tap Align Laser.
6'9"
X: 5
Y: 0
9'1"
X: 0 Y: -15
Settings Laser Calibration
Done
Y: -15
9'1"
X: 0