Before Using This Product; About This Product; About This Manual; Important - Pioneer SuperTuner III DEH-P8200R Mode D'emploi

Masquer les pouces Voir aussi pour SuperTuner III DEH-P8200R:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Before Using This Product

About This Product

The tuner frequencies on this product are allocated for use in North America. Use in other
areas may result in improper reception.

About This Manual

This product features a number of sophisticated functions ensuring superior reception and
operation. All are designed for the easiest possible use, but many are not self-explanatory.
This operation manual is intended to help you benefit fully from their potential and to
maximize your listening enjoyment.
We recommend that you familiarize yourself with the functions and their operation by
reading through the manual before you begin using this product. It is especially important
that you read and observe the "Precaution" on the next page and in other sections.
This manual explains head unit operation. You can perform the same operations with the
remote controller. The remote controller offers the convenience of ATT, a function not
provided on the head unit.

Important

The serial number of this device is located on the bottom of this product. For your own
security and convenience, be sure to record this number on the enclosed warranty card.

About the Demo Mode

This product features two demonstration modes. One is the Reverse Demo mode, the other
is the Feature Demo mode.

Reverse Demo

If you do not perform an operation within about 30 seconds, screen indications start to
reverse, and then continue reversing every 10 seconds. Pressing button 5 when power to
this product is switched OFF while the ignition switch is set to ACC or ON cancels the
Reverse Demo mode. Pressing button 5 again to start the Reverse Mode.

Feature Demo

The Feature Demo automatically starts when power to this product is switched OFF while
the ignition switch is set to ACC or ON. Pressing button 6 during Feature Demo operation
cancels the Feature Demo mode. Pressing button 6 again to start the Feature Mode.
Remember that if the Feature Demo continues operating when the car engine is switched
OFF, it may drain battery power.
Note:
• You cannot cancel a Demo mode when the front panel is open.
• The red lead (ACC) of this product should be connected to a terminal coupled with ignition switch
ON/OFF operations. If this is not done, the vehicle battery may be drained.
5

Publicité

Chapitres

Table des Matières
loading

Table des Matières