Control Panel - WMF KULT pro Power Mode D'emploi

Masquer les pouces Voir aussi pour KULT pro Power:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20

Control panel

on/off switch
To use the appliance, you must first turn the on/off switch to the on position (Pos. I). You can then
select automatic programmes, use the Pulse function or the speed controller.
Pulse function
The motor runs at maximum speed as long as the PULSE button is held down. This is particularly
useful for a final mix before pouring.
Programme buttons
In order to carry out common tasks with the Smoothie Blender, the appliance has three automatic
programmes for smoothies, sauces and frozen foods.
Smoothie
The Smoothie button can be used for preparing green smoothies easily. Switch on the appliance using
the On/Off switch (Pos. I). Now press the Smoothie button, and the blender will start an automatic
programme with different speeds.
The programme ends automatically. You can stop the programme at any time by pressing the
Smoothie button again or moving the On/Off switch to off (Pos.
Example recipe: "Green Smoothie with pear and salad"
Ingredients:
4 handfuls lamb's lettuce
1 celery stalks
1 fennel bulb
½ cucumber
1 avocado with seed
1 avocado without seed
1 pear
1 lemon slice
1 large piece of turmeric
approx 700 ml water
Preparation:
▪ Wash the lamb's lettuce, celery stalks and cucumber. Peel the avocados, cut the cucumbers and
celery into quarters and add to the jug together with lamb's lettuce and approx 300 ml water.
Tip: If you add ice cubes or crushed ice to the jug instead of half of the water it will make the
Smoothie cooler.
Close jug with the lid.
▪ Switch the Smoothie Blender on with the On/Off switch and press the Smoothie button. The
programme will start automatically.
14
Speed controller
You can use the speed controller to infinitely adjust the speed of the high-
performance motor between min and max.
For this, switch the appliance on using the on/off button (Pos. I) and select the
desired speed with the speed regulator.
When you have finished blending, turn the speed controller back to the home
position (see image) and then switch the on/off button off again (Pos.
).
).

Publicité

Table des Matières
loading

Table des Matières