Introduction - Luda Elektronik trailerCam Guide D'utilisation

1. Introduction

Congratulations to your purchase of trailerCam™ from LUDA Elektronik AB.
Your trailerCam-solution will give you safe supervision of your horse in your trailer.
We hope that the trailerCam-solution will satisfy your needs and exceed your expectations. The
products of LUDA Elektronik AB operate on the 2,4 GHz frequency and has a standard range of 100
meters at a clear line of sight. The camera and the monitor is compatible with all LUDA Elektronik
AB equipment.
Notice that LUDA Elektroniks' products transmit on an open frequency and that the signal is not
encrypted. This means that the signal can be captured by another 2,4GHz device within the camera
range.
The product is CE-certified which means that it fulfils all established rules and demands for usage
within the EU. The CE-certification further implies that the radiation level is below the established
radiation levels stated in the EMC directive 89/336/EEC and R&TTE directive (1999/5/EC).
We thank you for purchasing the trailerCam-solution and we hope you'll easily get trough the
installation process. If questions arise during the installation, please read through the different
troubleshooting chapters and the FAQ chapter. If further questions arise you are very welcome to
contact our friendly customer support.
Before you start reading about the installation of your trailerCam-solution we ask you to read through
chapter 2. Safety precautions / Important information.
For news on our product range or accessories to your trailerCam-solution, please visit our website:
www.trailercam-europe.com
LUDA Elektronik AB
- 25 -
DE
EN
FR
SV