Switching 12/24H Mode; Selecting Weekday Display Language - Eurochron EFTH 902 Mode D'emploi

—
Briefly press the button "MODE" (10) to terminate setting mode.
The previously set time is displayed.
If setting the time or date manually, the DCF reception is deactivated. If DCF
reception is to be activated again, proceed as described in chapter 10. b).
The settings for weekday display language and 12h/24h mode remain active.
b) Switching 12/24h Mode
—
Hold the "MODE" button (10) down until year flashes in the display.
—
Briefly press the "MODE" button (10) several times, until "12 Hr" or "24 Hr"
flashes on the display.
Now use the buttons "" (11) or "" (12) to switch between 12h and 24 h mode.
In 12h mode, "AM" is displayed to the left of the time during the first half of
the day, "PM" during the second half of the day.
—
Briefly press the "MODE" button (10) repeatedly until no display flashes anymore;
then leave the setting mod again.
c) Selecting Weekday Display Language
—
Hold the "MODE" button (10) down until year flashes in the display.
—
Push the "MODE" button (10) repeatedly until the weekday display language
flashes in the lower right of the display.
The buttons "" (11) or "" (12) can be used to select the language now:
"DE" = German
"Fr" = French
"IT" = Italian
"SP" = Spanish
"DU" = Dutch
"SW" = Swedish
"En" = English
—
Briefly press the button "MODE" (10) to terminate setting mode.
50