Switching Off The Alarm; Switching Off The Alarm Function; Snooze Function; Automatic Switch-Off (Sleep Function) - SilverCrest SRW 2 A1 Mode D'emploi

Switching off the alarm
GB
♦ While the alarm is sounding, press the
IE
switch off the alarm for 24 hours.
If the alarm is not manually deactivated, the device will switch it off
automatically after 1 hour.
Switching off the alarm function
♦ Press the AL1/DOWN button
until the point next to the alarm type (
goes out.

Snooze function

♦ While the alarm is sounding, press the SNOOZE/LIGHT/DIM
button
the alarm sounds again.
Automatic switch-off (sleep function)
When the sleep function is activated, the device switches itself off
after an interval of between 60 and 10 minutes.
Press the SLEEP button
♦
The switch-off time of 60 minutes appears on the display
♦
Pressing the SLEEP button
time by 10 minutes each time.
Press the SLEEP button
♦
in the display
display
To switch off the sleep function, press the SLEEP button
♦
OFF appears on the display
for approx. 2 seconds. The device will also be switched off.
18
to switch off the alarm for a short time. After 6 minutes
13
9
9
. After a few seconds, the time reappears on the
.
/FM/AM button
or AL2/UP button
15
= Alarm,
to switch the device on.
repeatedly reduces the switch-off
9
until the desired switch-off time is shown
or press the
7
repeatedly
14
= Radio)
.
, until
9
/FM/AM button
SRW 2 A1
to
7