Munchkin MKFE0769-02 Notice D'utilisation page 9

4. Open the rubber flap on the back of the
warming unit, then insert the power cord.
Plug the cord into an electrical outlet.
5. Turn the warming unit right side up, then
press the power button for two seconds to
start warming. The digital display will turn on.
ON/OFF: Press for 2 seconds.
6. When the liquid reaches 37°C, the warming unit
will beep to indicate the cycle is complete. The
liquid will be kept at this temperature for up to
30 minutes after the cycle is complete. After the
30 minutes the warming unit will auto shut off.
NOTE: To ensure your liquid is warmed properly,
wait until the end of the cycle before removing
the bottle.
7. Flip the warming unit upside down and
unscrew the baby bottle. Always check
the liquid's temperature before feeding.
Press the power button for two seconds
to turn off the warming unit.
How to Use
9