TallyGenicom 6600 Série Guide De Référence Rapide page 23

Vertical Position
Knob
Platen
Stop
Platen Lever
183444 REV B
Figure 16. Setting the Platen Lever
8. Turn the vertical position knob to feed the paper up into the
paper guide assembly.
9. Turn the platen stop knob clockwise or counterclockwise to
match the paper thickness (A-B-C scale corresponds
approximately to 1-, 3-, and 6 part paper thickness).
See Figure 16.
10. Lower the platen lever until it stops.
11. Press the FF key several times to make sure the paper feeds
properly beyond the tractors over the lower paper guide. Feed
sufficient paper to ensure the paper stacks correctly.
12. Reset the TOF (see "Set The Top-Of-Form" on page 17).
A
Paper Thickness
Indicator
A
Platen Stop
Knob
23
1