Denon AVR-1802 Mode D'emploi page 38

ENGLISH
• Operating the surround mode and surround parameters from the main unit's panel.
1 Turn the SELECT knob to select the surround mode.
• When turned clockwise
STEREO
VIRTUAL SURROUND
• When turned counterclockwise
STEREO
VIRTUAL SURROUND
To select the surround mode while adjusting the surround parameters, channel volume or tone control, press the surround mode
button then operate the selector.
2
Press SURROUND PARAMETER.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 39.
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When playing PCM digital signals or analog signals in the 5CH STEREO, ROCK, ARENA, JAZZ CLUB, VIDEO GAME, MONO MOVIE or
MATRIX surround modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches
automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround.
38
SELECT
(Main unit)
DOLBY PRO LOGIC 5CH STEREO
MATRIX
DOLBY PRO LOGIC 5CH STEREO
MATRIX
(Main unit)
(Main unit)
B
MONO MOVIE ROCK ARENA
VIDEO GAME JAZZ CLUB
MONO MOVIE ROCK ARENA
VIDEO GAME JAZZ CLUB
1 2 1,3