Product Installation - Aqara G2H Pro Manuel D'utilisation

* "Accessory not found". Please wait for 3 minutes after resetting the camera. You can manually
enter the HomeKit setup code and add it again.
Notice
Use of the Works with Apple badge means that an accessory has been designed to work
specifically with the technology identified in the badge and has been certified by the developer to
meet Apple performance standards. Apple is not responsible for the operation of this device or its
compliance with safety and regulatory standards.
A 10-day recording history from your Camera Hub G2H Pro is securely stored in iCloud and
available to view in the Apple Home app on your iPhone, iPad, or Mac. You can add one camera to
your 200 GB plan or up to five cameras to your 2 TB plan at no additional cost. Camera recordings
don't count against your iCloud storage limit.
Communication between iPhone, iPad, Apple Watch, HomePod, or Mac and the HomeKit-
enabled Camera Hub G2H Pro is secured by HomeKit technology.

Product Installation

Please make sure the camera is added successfully, and then install it onto
1
the wall.
You can place the camera on a horizontal surface, such as a desk, table,
2
bookcase, and so on.
The base of the camera contains a magnet, which can be attached to the
3
surface of ferrous material, such as refrigerator, iron door, and so on. Do not
place it near the main unit of the computer or hard disc.
You can also use double-sided tape to attach the magnet to the surface of
4
smooth materials, such as glass, tile, latex wall, and so on, or fastening
screws can be used to fix the magnet sheet on the wall, and then attach the
camera to the magnet.
04