gigamedia GGM AXA1EMK2K Manuel Utilisateur page 7

GGM AXA1 - Series access control
EN
To add a Pin user
1 User ID number
The ID number is any number between 1 & 2000. The PIN is any four digits between 0000 &
9999 with the exception of 1234 which is reserved. Users can be added continuously without
exiting programming mode as follows:
1 User ID N°1
To delete a PIN user
2 User ID number
Users can be deleted continuously without exiting programming mode
To change the PIN of a PIN user
(This step must be done out of programming mode)
* ID number #
To add a card user (Method 1)
This is the fastest way to enter cards, user ID number auto generation.
1 Read card
Cards can be added continuously without exiting programming mode
To add a card user (Method 2)
This is the alternative way to enter cards using User ID Allocation. In this method a User ID is
allocated to a card. Only one user ID can be allocated to a single card.
1 ID number
User can be added continuously without exiting programming mode
To add a card user (Method 3)
Card number is the last 8 digits printed on the back of the card,user ID number auto genera-
tion
1 Card number
User can be added continuously without exiting programming mode
To add a card user (Method 4)
In this method a User ID is allocated to a card number.
Only one user ID can be allocated to the card number
1 ID number.#
User can be added continuously without exiting programming mode
To delete a card user by card.
2 Read card
Note users can be deleted continuously without exiting programming mode
To delete a card user by user ID.
2 Read card
This option can be used when a user has lost their card
# PIN #
# PIN # User ID N°2 #
#
Old PIN # New PIN # New PIN #
#
# Read card #
#
Card number.#
#
#
PIN #
8
User Manual