SuperFish KOI PRO Combi Drum 30000 Mode D'emploi page 6

Installation
Fig. C Remove the quartz glass (c) from the packaging and slide the O-ring (g) over the plastic part of the quartz glass.
• Slide the quartz glass into the adapter (b). Make sure that the O-ring (g) remains in place between the edge of the
adapter and quartz glass.
• Place the O-ring (h) correctly in the top of the quartz glass.
• Unpack the UV lamp (d) and carefully slide the lamp halfway into the quartz glass (c).
• Insert the lamp into the lamp holder (e) and slide it further into the quartz glass. Make sure that the pawl in the
plastic part of the quartz glass falls into the recess of the lamp holder, which activates a microswitch. The micro-
switch is an extra security, it ensures that the UV lamp is always switched off automatically when disassembling
(in case you forgot to switch off the UV lamp).
• Tighten the lock nut (f) hand-tight at the adapter (b), so that it is firmly in place.
• Check the whole assembly for possible leaks.
• Insert the plug into the control box (see manual of the Combi Drum filter) at the specified position.
• Make sure that the UV lamp is completely submerged and the filter cover is closed before before switching it on.
Maintenance
• Remove the plug from the socket before carrying out maintenance!
• The UVC device should be cleaned twice a year. As soon as algae growth increases, check the UVC device and UV-
lamp and clean the whole or exchange the UV lamp (Art. N6050125) as needed.
• The lamp is hot, wait 10 minutes after switch off before opening the UVC device.
• Ensure that the water is drained out of the filter first, before removing the UVC device.
• Undo the lock nut (f) and remove first the lamp holder (e) and then carefully the UV lamp (d) from the quartz glass (c).
Then remove the quartz glass from the adapter. If necessary, you can also replace the lamp.
• The High Output UV lamp has an effective life span of approximately 16,000 hours (±2 years). The lamp will still
burn beyond this period, but the UV radiation is no longer effective.
• Clean the quartz glass outer face with a soft cloth and SuperFish Pump & UVC Clean carefully. After cleaning,
thoroughly rinse the quartz glass with clean tap water and check for damage. Replace the quartz glass (Art.
N6050135) if it shows any damage (to prevent glass breakage).
• Reinstall everything, making sure the O-rings are correctly positioned.
• Tighten the lock nut (f) hand-tight at the adapter.
• Check the whole assembly for possible leaks.
6