Bestron DC30T Mode D'emploi page 20

montAGe
1. Secure the mounting plate to the outlet box
with two screws provided with outlet box. See
image 2.
for down rod type assembly:
2. Pass the canopy into downrod. Carefully let
the wires pass through the downrod. Pass the
lower end of the downrod into the mounting
collar, secure with safety pin. Spread cotter pin
to fix the safety pin
3. Tighten the set-screws against mounting collar.
See image 3A.
.
for close to ceiling type assembly:
4. Secure the canopy to the decorative motor
housing with screws and washers. See image
3B.
5. Hang the fan to the j-hook of the mounting
plate with the hole on the canopy hanging on
the j-hook. See image 4A and 4B.
6. Make wire connections according instructions.
See Wiring Instruction and image 7.
.
7. Secure the canopy to the mounting plate
with four screws provided. Turn the canopy
clockwise if necessary to make sure the
installation securely. See image 5
8. Attach blade holders to fan using 2 screws per
holder. See image 6.
wirinG instrUction
1. There are four coloured wires coming from the
top of motor:
Brown - live wire for fan
Blue - neutral wire
yellow/Green - Ground wire
Black - live wire for light kit
2. Connect the wiring of the fan with the wiring of
your power net with a connection block.
Connect the wire of fan
with wire from junction box
by terminal block. Brown to
the brown, Blue to the blue,
Black to black. Yellow/Green
to yellow/green.
Always connect the ground
wire (Yellow/Green) first.
A
A
A
Yellow/Green
Yellow/Green
Blue
Blue
Black Brown
Black
Motor
20
User's instructions
B
B
B
Down rod
Yellow/
Green
Mounting
Canopy
Plate
Yellow/Green
Earth
Neutral
Line
N
L