Bluetooth - Kensington KeyCover Guide De Démarrage Rapide

3 On your iPad, tap Settings.
4 Open Bluetooth and make sure Bluetooth is on.

Bluetooth

5 The KeyCover now appears on your iPad screen. Tap Bluetooth Keyboard. Your iPad
screen displays a passkey. Enter the passkey on the keyboard, and press Enter.
Bluetooth Keyboard
6 Your iPad screen shows the KeyCover as Connected. On the KeyCover, the Bluetooth
Status Indicator Light turns off. You can now use your KeyCover to type in any app.
Bluetooth Keyboard
* If the KeyCover is not in pairing mode, press the Pairing Key for 3 seconds. The
Bluetooth Status Indicator Light starts blinking. Repeat steps 3 through 6.
NOTE: The KeyCover will go into sleep mode if left idle for 10 minutes. To wake up the
KeyCover, press any key to resume the connection.
To extend battery life, turn off the KeyCover when not in use.
The iPad will scan for new devices.
3
Settings
ON
Connected
3 seconds