Renkforce RUSD-SP 12/24 V Notice D'emploi page 46

Program Type (PTY)
This code gives the receiver information on the type of the transmitted programme (e.g. sports, classic,
news etc.). The listener can select his favourite programme more directly.
A national disaster alarm can also be sent this way. However, not all the radio stations offer the PTY ser-
vice.
Clock Time (CT)
Many stations transmit the current time in the RDS data. If a radio receives this signal, it sets the in-built
clock automatically.
Therefore, when you leave the transmission area, the RDS system has the advantage that it switches to
a similar transmitter station that can be better received. However, it only changes when it finds a better
station with the same programme.
Short signal attenuations due to the reception cannot be eliminated by the RDS system either, since this
would mean that the car radios permanently switches back and forth. The listener would feel much more
disturbed by this than by short-term reception problems.
Another advantage of the RDS system is that the station name is displayed. The station name of an RDS
station is displayed in the car radio.
Button functions
BD / BAND button ()
Briefly push this button to select the band range of the radio unit.
There are 3 FM ranges:
FM1 > FM2 > FM3
On each of the three band ranges, 6 stations can be stored on the station button 1-6 (4).
and
Buttons
With these buttons the receiving frequency can be changed to adjust stations in radio operation.
• Brief pushes of this button change the frequency step by step.
• Pushing a button longer activates automatic station scan. The auto-scan only stops at the next station
that can be received well.
Station buttons 1- (4)
If you briefly push these buttons, you can select a station you have pre-set. If you want to store a station
you are listening to, simply push the desired button for more than three seconds.
Every one of the three FM ranges (FM1-3) has six station buttons. Therefore you can assign
18 station buttons.
4
(7)