Beko QWIK-PURE 100 Instructions De Montage Et De Service page 16

Table des Matières

Publicité

Installation • Instalación
Installation • Instalação
incorrect • no correcto
incorrect • incorrecto
16
correct • correcto
correct • correcto
english
Wastewater drain
• Must be lower than the water outlet of
the QWIK-PURE
• Install a trap against odours
Connecting the wastewater hose:
• Use a 1" I.D. hose with clamps to attach
to the QWIK-PURE water outlet.
• Lay the hose with a continuous slope
down to the wastewater drain (trap).
Please note: the service valve is closed
during operation.
Note:
Continuous slope
The condensation collecting line must
always have a downward slope (at least
1°).
Note:
Continuous slope
Avoid water pocket in the feed hose to
the pressure relief chamber.
Note:
Continuous slope
Avoid water pocket in the discharge hose
to the waste water connection.
QWIK-PURE 100

Publicité

Table des Matières
loading

Table des Matières