Before First Use; Using The Appliance - SilverCrest SGM 110 A1 Mode D'emploi

Before first use
1) Clean the appliance as described in the section "Cleaning" to remove any
transport dust. Dry it thoroughly.
2) Place the appliance on a stable and level surface.

Using the appliance

NOTE
► Always use distilled water for making face masks!
1) Insert the connector plug
2) Insert the plug into a mains power socket. A beep sounds and the indicator
lamp
3) Place the mask mould
notch at the end extends underneath the device and bends around the
bulge at the bottom of the appliance (see Fig.1):
SGM 110 A1
into the socket
lights up green, then flashes green continuously.
in front of the appliance in such a way that the
Fig. 1
on the appliance.
GB│IE
│
27 ■