Operation - Bartscher Deluxe Mode D'emploi

5.3 Operation

Before first use
•
Before first use, clean the device according to the instructions in 6.2 "Cleaning".
•
Before first use, heat the device up without batter ("Activating and heating the
device"). Leftover production materials can create smoke when heated; this is not
a danger to the user, nor a sign of any defect. Ensure proper ventilation during first
heating.
•
Wait for the device to cool. Rub a small amount of cooking oil into the baking plates
with a paper towel. This will prepare the baking plates for baking waffles.
Activating and heating the device
•
Prepare waffle batter using your own recipe or our suggested recipe ("Instructions
and tips").
•
Prepare the device. Place the tray on the device's bottom surface. Always use the
device with the tray installed to stop grease, batter and other leftovers from getting
into the device.
•
Close the device's cover (handle facing up).
•
Connect the device to a properly-installed single outlet and turn it on via the ON/OFF
switch. An alarm will sound three times, and the green control light will come on.
•
Set the desired time and temperature values following the instructions in " Changing
settings ". Next, press the START / STOP button and begin heating the device
without batter, using the set temperature and time values.
NOTE!
For best results, heat the device to the appropriate temperature before making
waffles.
•
The red control light comes on during the heating phase. When the set temperature is
reached, this light goes off; it will come on again when the temperature falls below the
desired level.
WARNING! Hot external surface!
When in use, the device's baking plates and external surfaces can get very hot.
To avoid burns, do not touch these surfaces and grasp the device only using
the handle, and use only control elements (ON / OFF switch, buttons).
- 29 -