Installation And Connection - Bartscher Deluxe Mode D'emploi

•
Never operate the device near flammable materials (petrol, spirit, alcohol, etc.). Heat
causes them to evaporate, and contact with heat sources can lead to serious injury
and damage.
•
Never leave the device unattended when in use.
•
Never clean the device or any of its parts in a dishwasher.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label). Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

•
Unpack the device and remove all packing material.
•
Place the device on a level, stable surface which can support the weight of the
device and is not heat sensitive.
•
The surface where the device is installed must be easily accessible and large. Keep
a distance of 15 cm at the rear, right and left of the device, and 50 cm at the top and
front. This ensures ease of use and proper air circulation.
•
Never place the device in wet or humid places.
•
Never place the device on a flammable surface.
•
Never place the device near an open flame, electric ovens, heating ovens and other
sources of heat.
•
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
•
Position the device in a way so that the power plug is always accessible, so that it
can be quickly removed from its socket as necessary.
- 28 -