Baninni Home STELLINO BNBS003 Mode D'emploi page 16

MANUAL
ASSEMBLY INSTRUCTIONS
STEP 8
E F
STEP 8: Titlt the bars (e) and (f) upwards until they come together.
STEP 9: Cover the bars (e) and (f) with the seat liner (i). Make sure
the Baninni Logo is facing upwards to ensure the liner is put on
correctly. Separate the two bars (e) and (f) sliding the seat liner (i)
along the two bars.
STEP 10: To ensure the liner is held firmly fasten the velcro at
the bottom edge of the seat liner (i). When the tubes have been
covered, fasten the protective nets using the press studs (j).
STEP 9
I
STEP 10
J