Baninni Home STELLINO BNBS003 Mode D'emploi page 17

ASSEMBLY INSTRUCTIONS
STEP 11
STEP
11: Insert the back of the seat so that you reach the loops of the seat
Rig can. Attach the belts to the loops of the rig.
STEP 12: To access
the buckles of the
harness, tilt the seat
inwards. Fit each strap
into the buckle of the
harness. Thread the
strap through the top
slit then the bottom
slit. Pull on the straps
so that they are quite
tight.
Press the 'Lock' button to switch to
a fixed position.
STEP 12