Baninni Home STELLINO BNBS003 Mode D'emploi page 14

MANUAL
ASSEMBLY INSTRUCTIONS
STEP 1: Insert the right part of the rear leg
(B) into the right swing leg (c). Make sure the
push button of the rear leg (b) is clipped into
the opening of the right swing leg (c). To do
this correctly, you must hear a 'click'. To fix the
two parts insert a 35mm screw (h).
STEP 2: Insert the left part of the rear leg (b) in
the left swing leg. Make sure the push button
of the rear leg (b) clips into the opening the
opening of the left swing leg (d) until you hear
a 'click'. To fix the two parts, insert a 35mm
screw (h).
STEP 3: Insert the front right leg (a) into the
right swing leg (c) and the front left leg (a)
into the left swing leg (d). Press the push
button and simultaneously push the front leg
(a) into the swing legs (c) and (d) until you
here a 'click'.
A
B
C
STEP 1
STEP 2
D STEP 3