Service Procedures - DBI SALA FAST-Line 3900105 Manuel D'entretien

1.0 FOREWORD
EN
1.1 ABOUT THIS MANUAL: This manual is intended for use by competent individuals properly trained in the
procedures contained herein, and authorized to perform service work. No distribution or duplication by any
means is allowed without the written permission of DBI/SALA.
1.2 SERVICE QUESTIONS: If additional service information is required, contact a DBI/SALA technical service
representative.
1.3 ERRORS AND OMISSIONS: DBI/SALA has made every effort to ensure that the information in this manual
is correct and complete. Please contact DBI/SALA if errors are found.
1.4 PRODUCT DESCRIPTION: FAST-Line
Lifelines with the FAST-Line feature. Available FAST-Line kits are listed in Table 1.
3900105 50 ft. (15 m) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator.
3900106 50 ft. (15 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator.
3900107 50 ft. (15 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator.
3900108 85 ft. (26 m) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator.
3900109 85 ft. (26 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator.
3900111 85 ft. (26 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator.
3900112 130 ft. (40 m) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator.
3900113 130 ft. (40 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator.
3900114 130 ft. (40 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator.
3900168 175 ft. (53 m) of 3/16 in. (4.76 mm) galvanized wire rope, self locking plated steel swiveling snap hook with indicator.
3900169 175 ft. (53 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking plated steel swiveling snap hook with indicator.
3900170 175 ft. (53 m) of 3/16 in. (4.76 mm) stainless wire rope, self locking stainless steel swiveling snap hook with indicator.
WARNING:
The Sealed-Blok SRL is part of a Personal Fall Arrest System
manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions must
be followed for proper use and maintenance of this product. Alterations or misuse of this product or failure to follow
instructions may result in serious injury or death.
1
IMPORTANT:
Capital Safety.

2.0 SERVICE PROCEDURES

IMPORTANT:
In most cases, replacing the lifeline cannot be considered as a complete servicing. A thorough inspection
of the unit must be performed by a Competent Person2 per the "Inspection" instructions in the "Sealed-Blok Self Retracting
Lifelines User Instructions" (5903059 or 5903078) . If the snap hook impact indicator shows signs of activation (refer to
the User Instruction Manual), the unit should be removed from service and fully serviced, including the brake and the other
internal safety components. If it is known that the impact indicator is activated but that the unit has not been used to arrest
a fall (retrieval situation for example) then it is acceptable that only the lifeline gets replaced, as long as the rest of the unit
passes the "Inspection" procedures in the "Sealed-Blok Self Retracting Lifelines User Instructions" (5903059 or 5903078) .
2
WARNING:
Some service procedures in this manual can be hazardous, and may result in serious injury. It is recommended
that persons engaged in service work wear suitable clothing and proper hand, eye, face, and foot protection as necessary.
WARNING:
Use of parts, materials, or procedures not specified or supplied by DBI/SALA may be dangerous, and could
result in death or serious injury to the user. Only genuine DBI/SALA replacement parts may be used.
NOTE:
Torque measuring service tools must be maintained in correct calibration, traceable to the National Bureau of
Standards.
2.1 PRE-SERVICE INSPECTION: Before beginning the FAST-Line cable replacement procedure, a functional
inspection of the Sealed Blok unit should be performed. This may reveal an otherwise undetected defect.
Refer to the "Inspection" instructions in the "Sealed-Blok Self Retracting Lifelines User Instructions"
(5903059 or 5903078) .
1 Fall Arrest System: A system that prevents the worker from colliding with an obstruction or lower level by arresting a fall.
2 Competent Person: One who is capable of identifying existing and predictable hazards in the surroundings or working
conditions which are unsanitary, hazardous, or dangerous to employees, and who has authorization to take prompt corrective
measures to eliminate them.
TM
Table 1 - FAST-Line™ Replacement Lifeline Kits
If you have questions on the use, care, or suitability of this equipment for your application, contact
is a field-replacement lifeline for Sealed-Blok Self Retracting
2
. The user must read and follow the
1