Information For The User; Safety Recommendations - Brandt ROB-304V Manuel D'instruction

1/ INFORMATION FOR THE USER

A. Safety recommendations
Safety tips when connecting the appliance
1. Read all instructions before use, and see all diagrams, and keep these instructions for further reference.
2. This appliance is intended for household use only.
3. Check if the voltage indicated on the base of the appliance corresponds to the local mains voltage before you
connect the appliance.
4. Ensure the appliance is switched off before connecting the plug to the mains!
5. Don't let cord hang over edge of table or counter, do not let cord contact hot surface, including the stove.
6. In the event of incompatibility between the mains socket and the appliance plug, the socket should be
replaced by the manufacturer, its after sale service or a qualified professional in order to avoid any danger.
Safety when using the appliance
1. Never use accessories or parts made by other manufacturers, they may cause a risk of injury to persons.
2. Do not use the appliance if its power cord, plug, blade or other part is damaged. In the event of any damage
to the power cord or blade of this product, it can only be replaced with a special one for use with this product.
3. Make sure all parts are correctly mounted before you switch on the appliance.
4. Only use the appliance when handle is locked, never reach into the feeding tube with your fingers or an
object while the appliance is running.
5. Care is needed when handling cutting blades, especially when removing the blade from the bowl, emptying
the bowl and during cleaning.
6. Handle the chopper blade only by the shaft, and the shredding and slicing discs only at the outer edge.
7. Ensure the motor has stopped completely before changing the cutting tools, disassembling or cleaning.
8. The appliance is not intended for use by young children or infirm persons without supervision.
9. Avoid contact with the blades and knives while the appliance is in operation.
10. Never place your hand in way of the chopper blade or the shredding and slicing disc. Keep long hair,
neckwear, or other items of clothing away from the appliance. Disconnect the appliance from the mains before
removing or exchanging the cutting tools!
11. Do not remove the lid until the cutting tools have stopped rotating
12. When working with the shredding and slicing disc, always place a bowl under the chute.
13. Do not remove the appliance the appliance lid until the cutting tools have stopped rotating. Always remove
the cutting tools before emptying the bowl.
14. Never overload the appliance. Information on the maximum feeding amounts when using the chopper can
be found in the processing instructions,
15. Do not leave the appliance exposed to the elements (rain, sun, ice, etc.).
16. Do not use or let any part of the appliance come into contact or near hot surfaces (kitchen gas or electric
hobs or ovens).
Safety when cleaning and maintaining the appliance
1. To avoid any danger, unplug the power cable before cleaning the appliance
2. Do not use detergents or abrasive sponges to clean the appliance.
3. Do not let the cable come into contact with the hot parts of the appliance.
4. Avoid touching the sharp blades, especially when the appliance is plugged in.
5. Don't immerse the motor base, plug or cord in water or any other liquid, to avoid any danger.
6. Use a damp cloth to clean the motor unit. The individual components can be cleaned in a dishwasher (upper
rack).
7. If the power cable is damaged, it should be replaced by the manufacturer, its after sale service or a qualified
professional in order to avoid any danger"
12