WAGNER AG-08 Manuel D'utilisateur page 7

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
NOTE: Lubricate all packings and moving
parts before reassembly with a lithium-
based grease.
8. Install the seal assembly into the front of the gun
head.
9. Install the retractor pins into the rear of the gun
head. Slide the rear housing onto the retractor
pins and secure in position with the lock nut.
10. WIth the trigger depressed, install the diffuser into
the front of the gun head and tighten securely with
a wrench.
11. Perform the "Adjusting the Seal Assembly"
procedure described below.
Adjusting the Seal Assembly
WARNING
Proper adjustment of the seal assembly is essential
to ensure positive shut-off when the trigger is
released.
1. Tighten the lock nut until the rear housing is flush
against the gun head.
2. Unscrew the lock nut 3/4 of a turn.
NOTE: To check the adjustment of the seal
assembly:
1. Move the gun trigger lock to the locked
position.
2. Pull the trigger.
With the trigger lock engaged, there should
be 1/32" of movement between the lock nut
and the rear housing while pulling the trigger.
Replacing/Removing the Filter
1. Pull the bottom of the trigger guard forward so that
it comes loose from the handle assembly.
© Wagner. All rights reserved.
2. Loosen and remove the handle assembly from the
gun head.
3. Pull the old filter out of the gun head.
4. Slide the new filter, tapered end first, into the gun
head.
5. Place the handle seal into the gun head with the
flat side of the seal toward the gun head.
Flat side of
handle seal
(toward gun head)
6. Thread the handle assembly into the gun head
until secure.
7. Snap the trigger guard back onto the handle
assembly.
Filter Chart
Part
Application
Number
0502954
Synthetic resin,
enamels, clean
varnishes, stains
azures
0502953
Base coat enamels,
primer enamels,
fillers, marking paints,
textured enamels
0502951
Emulsions,
latex paints,
acrylic paints
0502952
Filler paints,
large area surfaces
7
Bevelled side of
handle seal
(toward handle)
Filter
Color of
Type
Filter
Body
Extrafine
red
Fine
yellow
Medium
white
Coarse
green
GB
R

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

029636202963860296393029638802964650296392

Table des Matières