vivocare Smilky Mode D'emploi page 20

Tips
Some problems may come out during the process of sucking.Please
deal with them properly according to reference methods.
Phenom-
enon
weak suc-
tion
no suction
can't turn
on the
device
milk back-
flow
When the adapter or host machine is breakdown, please send them
to the maintenance point or to the appointed professional to fix.
20
Reason analysis
1.Air leak of various connection parts (bottle
connector, valve and flap; bottle connector
and silicone cushion; connector, bottle
connector and pump unit)
2.Air pipeline of pump unit is blocked. For
example, fold & bend of the tubing, sun-
dries in the tubing.
3.Inner cap installed not right
1.non-setting or improper setting of the flap,
or the flap is distortion or damaged.
2.2.Plastic parts are transmutation damaged
by poaching or using the disinfection cup-
board, microwave oven, pressured cooker.
3.Inner cap installed not right
1.AC adapter with the wall socket or the
jack DC power in pump unit is connected
incorrectly.
2.Check the placed battery polarity if it is
correct.
3.When the dry battery power is low, the
buzzer alerts with "beep-beep".
During sucking,breast milk or water pouring
into the tubing, which is caused by mem-
brane damaged or installed not right.
Processing
method
Check every
connecting
parts, assem-
ble again,
depurate &
clean up
install the flap
and replace
new fittings
connect
again and
collocate
rightly
Immediately
shut down,
clean up