vivocare Smilky Mode D'emploi page 16

2. Connection of pump unit
After connecting the pump unit & sucking device as pictures show,
breast pumping can be started.
1. Pump unit and sucking device
The tubing has 2 connectors at two ends. Insert the connector
into the air vent of membrane cover04 and the air vent of pump
unit16 separately, to make them tight, avoid air leak.
2. Pump unit and AC adapter
Connect the adapter17 to pump unit16, then plug the adapter into
an electrical socket. At that same instant, the pump LCD display
flashes, which means in standby mode.
3. Built-in battery
The pump unit has built-in battery which 4pcs No.5 1.5V dry bat-
tery could be used anytime as pictures show.
16
open
close