Aux In Operation; Bluetooth Operation - Tangent Danmark Dab2go+ Mode D'emploi

Scan setting: set to receive the strong signal stations only. If the radio scans to receive
many poor signal stations, set to Yes to get the strong signal stations only.
Audio setting: set to receive the stereo or mono FM signal.
Preset the FM stations
When listening to the FM station, press and hold MENU to go to the system menu, then
select Preset Store to save the favourite station. Rotate < TUNING /SELECT> control to
choose the number and then press < TUNING /SELECT> control to store the station.
Shortcut for preset 1-5 can be set to store the favourite station by pressing and holding
number 1-5 button respectively.
Recall the preset FM stations
Press and hold MENU button to go to system menu, then select Preset Recall to recall
the desired preset station. Rotate < TUNING /SELECT> control to choose the preset
number and then press < TUNING /SELECT> control to confirm.
Shortcut for preset 1-5 can be recalled by pressing its corresponding number 1-5 button
directly.
RDS (Radio Data System) Receiption
You can view the information of FM stations which broadcast added data compatible
with RDS. Press INFO button to view the programme information, the programme type,
frequency or the date if available.

Aux In Operation

In AUX IN mode, you can play audio file from an external source such as MP3 player. To
play audio file with AUX IN mode, follow the steps below:
- Turn the volume low on both the device and the audio source device if adjustable.
- Connect the external audio source to the 3.5mm AUX IN socket at the back of the
device using the audio cable (included)
- Press MODE button and select AUX IN on the main menu.
-
Adjust the volume of the device (and the audio source device if necessary) as
required to start playing.

Bluetooth Operation

When you select the Bluetooth mode, the device is entering into pairing stage. Turn on