Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cisco Business Edition 4000
Install the BE4000
Note:
You must be a Cisco Partner to perform the initial site configuration,
deployment, and installation of the BE4000.
Step 1.
Read Cisco Business Edition 4000 Partner Guide and Cisco Business
Edition 4000 Release Notes available at
http://www.cisco.com/c/en/us/support/unified-
communications/business-edition-4000/tsd-products-support-series-
home.html.
Step 2.
Go to the Cisco Business Edition 4000 Management portal
(http://be4000.cisco.com) and create a configuration for the site. Bring
the site to the "Ready to Deploy" state.
Step 3.
Unpack the BE4000 and locate the QR code (17) on the underside of the
product.
Step 4.
Use a QR scanner application to scan the QR code and launch the
BE4000 portal. If you don't have a QR scanner, browse to the BE4000
deploy portal - http://be4000.cisco.com/deploy.
Step 5.
Enter the serial number (16) if prompted, and select your customer-site
configuration.
Step 6.
Connect the BE4000 to the network services as described in the portal.
Step 7.
We recommend that you install the BE4000 in a 19-inch rack. You can
also wall mount or place the BE4000 on any secure flat surface, if
preferred.
Step 8.
If you are installing in a rack, use the illustration (14) inside the front cover
as a guide to attach the mounting brackets with the screws provided. Use
suitable fastenings to secure the product in place.
Step 9.
Connect the power adapter to the BE4000 (7) and the mains supply, then
switch on (6). You can track the progress of your BE4000 activation in the
portal.
Publicité
Table des Matières
