Laserworld Club Série Mode D'emploi page 7

Manual: CS-500RGB KeyTEX
Mode DMX
Press to select the mode and press ‚ENTER' to activate the mode.
Enter the DMX address with the digit keys (e.g. press ‚0' ‚0' ‚3' and ‚Enter' for setting 003). Use
the Windows key to choose DMX mode again. You now can see your DMX address. If it's the
wrong address, just press any digit button (e.g. ‚4' 4') and you can set the right address.
When DMX mode is active, use following DMX chart for controlling via external DMX signal:
Channel Value
1 - modes 0 - 49
50 - 149
150 - 199
200 - 249
250 - 255
Attention! The following channel only works if text mode in Channel 1 is active (value 200 - 249)!
2 - text mode 0 - 19
20 - 39
40 - 59
60 - 79
80 - 99
100 - 119
120 - 139
140 - 159
160 - 179
180 - 255
Attention! The following channels only work if static DMX mode in Channel 1 is active (value 250 - 255)!
2 & 3 - pattern selection 0 - 255
4 0 - 209
210 - 255
5 0 - 255
6 0 - 255
7 0 - 255
8 0 - 255
9 0 - 255
10 0 - 255
11 0 - 255
12 0 - 255
Please note that not each pattern can be combined with each effect!
page 12 / 27
Function
laser off
automatic mode
sound mode
text mode
static DMX mode (patterns)
zoom in / out
static text
wave
text drawing
zoom out
x-axis movement
y-axis movement
y-axis rotation
x-axis rotation
z-axis rotation
patterns selection
colors selection
pattern flashes with speed selection
pattern drawing with speed selection
zoom in with speed selection
y-axis rotation with manual speed selection
x-axis rotation with manual speed selection
z-axis rotation with manual speed selection
x-axis movement with manual speed selection
y-axis movement with manual speed selection
stretch effect
English
ILDA Mode
Connect the external ILDA interface (DAC) to the laser system using an ILDA cable. Plug the
cable into the „ILDA IN" port at the back side of the laser system.
The laser automatically recognizes attached ILDA device and prioritizes its signal over the in-
ternal control modes.
Remember: As long as an external ILDA interface is connected to the laser, the internal opera-
tion modes of the device are disabled.
English
Manual: CS-500RGB KeyTEX
page 13 / 27