Hilti DX 6-GR Notice D'utilisation page 13

3.2 Product overview (fastener guides)
3.3 Controls on the fastening tool
The controls on the fastening tool are as follows:
3.4 Intended use
The product described is a fastening tool for driving nails, studs and fasteners into steel.
Use the product only in combination with the equipment designed for use with the fastening tool. Fastener
guides, piston and fasteners must be compatible with one another.
Use the product only with spare parts and accessories from Hilti and with cartridges and fasteners from
Hilti, or other suitable cartridges and fasteners.
3.5 Bluetooth
®
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc and any use
®
of such marks by Hilti Corporation is under license.
Bluetooth is a wireless data transfer system by which the two Bluetooth-enabled products can communicate
with each other over a short distance.
This product has a Bluetooth Low Energy module. The module enables communication and data transfers
between smart phones and Hilti gateway. The module is used for checking the status of the product and can
submit data attributes such as location of the receiving device, runtime, total application count, application
count during interval and timestamp of transfer.
Information about the connectivity functions offered can be found in the respective Hilti application
(app).
3.5.1 Data transmission via Bluetooth
The data transmission interval can vary, depending on the available power source of the product. The signal
range can vary greatly depending on external conditions, including the receiving device used. The Bluetooth
range can be significantly less inside closed rooms and through metallic barriers (e g. walls, shelving units,
cases, etc.). Depending on ambient conditions, several transmission intervals may be required before the
product is detected.
If the product is not detected, check the following:
• Is the distance to the mobile terminal device too great?
→ Reduce the distance between the mobile terminal device and the product.
3.5.2 Installing and setting up the app
In order to be able to use the connectivity functions, you first have to install the respective Hilti app.
*2253454*
2
@
;
=
%
Release button for selector ring for driving energy
The button unlocks the selector ring for driving energy or is used for
removal of the exhaust gas piston return unit.
Release button for fastener guide (A)
The button unlocks the fastener guide so that the fastener guide can
be changed or the fastening tool cleaned.
2253454
Fastener guide
Fastener guide release button
Buffer
Centering sleeve
English 5