After-Sales Service; Important - INFOSEC UPS SYSTEM G1 Solar MPPT Manuel Utilisateur

About batteries:
1. It is recommended that a qualified technician change the battery.
2. Before carrying out any kind of service or maintenance, disconnect the batteries and verify that no current
is present and no hazardous voltage exists in the terminals of high capability capacitor such as
BUS-capacitors.
3. Do not dispose of the battery in a fire as it may explode.
4. Do not open or damage the battery! The electrolyte, fundamentally sulphuric acid, can be toxic and
harmful to the skin and eyes. If you come into contact with it, wash thoroughly with water and clean dirtied
clothes.
5. Do not throw the battery into a fire. It may explode. It has to be disposed of separately at the end of its
useful life. Refer to local legislation and regulations.
6. The UPS contains one or two large-capacity batteries. To avoid any danger of electric shock do not open
it/them. If a battery needs servicing or has to be replaced, please contact the distributor.
7. Servicing should be performed or supervised by competent personnel who take the necessary
precautions. Keep unauthorised personnel away from batteries.
8. A battery may present a risk of electric shock and cause short circuits. The following precautions should
be taken by the qualified technician:
 Remove watches, rings or other metal objects from hands.
 Use tools with insulated handles.
 Disconnect the charging source prior to connecting or disconnecting battery terminals.
 When replacing batteries, use the same type and number of sealed lead-acid batteries.
AFTER SALES SERVICE

IMPORTANT!

When calling the After-Sales Department, please have the following information ready, it will be required
regardless of the problem: Product model, serial number and date of purchase.
Please provide an accurate description of the problem with the following details: type of equipment powered
by the UPS, indicator led status, alarm status, installation and environmental conditions.
You will find the technical information you require on your guarantee or on the identification plate on the back
of the unit. If convenient you may enter the details in the following box.
Mo d e l
G1 Solar MPPT ...
! Please keep the original packaging. It will be required in the event the product is returned to the After-Sales
Department.
CE conformity:
This logo means that this product answers to the EMC and LVD standards (regarding to the
regulation associated with the electric equipment voltage and the electromagnetic fields) and
comply with RoHS directives.
4
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 08 17 AA 59 201 05
S er ia l n um ber Da te of p urc has e