Operating Mode Description - INFOSEC UPS SYSTEM G1 Solar MPPT Manuel Utilisateur

Battery voltage/ Output frequency
Main CPU version checking
Secondary CPU version checking

Operating Mode Description

Operation mode
Standby mode / Power
saving mode
Note:
*Standby mode: The inverter is
not turned on yet but at this
time, the inverter can charge
battery without AC output.
*Power saving mode: If
enabled, the output of inverter
will be off when connected load
is pretty low or not detected.
24
INFOSEC UPS SYSTEM - 15, rue du Moulin - 44880 Sautron - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)240 94 29 51 - hotline@infosec.fr – 08 17 AA 59 201 05
Battery
50.0Hz
Main CPU version 1.00
Secondary CPU version 1.00
Description
No output is supplied by the
unit but it still can charge
batteries.
voltage=28.0V, output
LCD display
Charging by utility.
Charging by PV energy.
No charging.
frequency =