Identification Details Of Manufacturer; Marking Plate; Intended Uses - WOLFF T-REX Mode D'emploi Original

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1.3

Identification details of manufacturer

UZIN UTZ TOOLS GmbH & Co. KG
1.4

Marking plate

In compliance with the Machine Directive 2006/42/CE on vacuum cleaners, the machine is fitted with
CE plates.
When contacting the manufacturer or dealer, always quote the details shown on the vacuum cleaner plate.
1.5

Intended uses

These specific vacuum cleaner models have been designed, built and protected for vacuuming dusts and solid
materials only, using special filters.
Warning!
Always use specific filters for the type of dust or materials to be vacuumed.
Any other use is considered IMPROPER.
The vacuum cleaner is in any case intended for professional industrial use.
Uzin Utz Tools GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-41 | E-Mail info@wolff-tools.com | Internet
Ungerhalde 1
74360 Ilsfeld
Tel. +497062-91556-0
Fax +497062-91556-41
tools@uzin-utz.com
www.wolff-tools.com
Uzin Utz Tools GmbH & Co. KG
| D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 |
Fax +49 (0)7062-91556-41 | E-Mail tools@uzin-utz.com |
Internet
www.wolff-tools.com
www.wolff-tools.com
www.wolff-tools.com

Publicité

Chapitres

Table des Matières
loading

Table des Matières