Replacing The Filters - WOLFF T-REX Mode D'emploi Original

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.4

Replacing the filters

To replace the filters, proceed as follows:
Turn off the vacuum cleaner by pressing the motor STOP buttons.
Disconnect the vacuum cleaner plug from the power socket.
Important!
Wear individual protection devices.
Block the vacuum cleaner by means of the retainer.
Lift the lever that locks the container. Remove the container.
Release the retainers that hold the motor head. Lift the motor head and rest this on a flat surface being
careful not to damage the power cable.
WOLFF GmbH & Co. KG | D-74360 Ilsfeld | Ungerhalde 1 | Tel. +49 (0)7062-91556-0 | Fax +49 (0)7062-91556-10 | E-Mail info@wolff-tools.com | Internet www.wolff-tools.de

Publicité

Chapitres

Table des Matières
loading

Table des Matières