Short Instruction; Function Section / Keys - Kettler SF1B Mode D'emploi Et Instructions D'entraînement

Training and Operating Instructions
18
GB
G
G
G

Short instruction

Function section
The six keys are shortly explained in the following.
The more exact application is explained in the indi-
vidual chapters. In these descriptions the names of
the function keys are also used like here.
SET (press shortly)
With this function key, entries are called up.
The set data are accepted.
SET (press longer)
For display of all segments: call "Individual settings"
Reset
With this function key, the current display is deleted
for a restart.
Program
With this function key, the various programs are sel-
ected.
Pressing again
Minus – / Plus + keys
With these function keys, values are changed in the
various menus before the training and power is
changed during the training.
• To continue "Plus"
• Or return "Minus"
• Pressing longer > fast change
• Pressing "Plus" and "Minus" together:
• Power jumps to
• Value entry jumps to
RECOVERY
With this function key, the recovery pulse function is
started.
Comment:
Further functions of the keys are explained at the
respective position in the operating manual.
Pulse measurement
Pulse measuring can be carried out in two ways:
1. Ear clip (included in delivery)
The plug is put into the female connector.
2a. SF1B/SF3B: Chest strap + plug-in receiver (plug-in)
2b. SF2B: Chest strap without plug-in. In this electronic
unit, the receiver is built in behind the display. A plug-
ged-in ear clip must be removed.
(Chest straps are not included in delivery)
The Cardio-Pulse-Set with Polar chest strap and plug-
> next program
25 Watt
Off