Table des Matières
Publicité
6.3. SafeLink Manual+ category 2
Note: the mounting bracket is fitted with a magnet to avoid beacon activation (water, moisture) when installed in its
mounting bracket.
6.3.1. Mounting bracket installation
The mounting bracket should be installed in a clear area, well known and identified so that it can be reached easily
for emergency used. It should be strongly fixed onto a vertical surface with 3 screws according to drilling mask
hereunder.
Note: dimensions are in millimeters (inches in bracket).
Reminder: The instructions plate must be fixed close to the mounting bracket.
DOC09028A
27
Publicité
Table des Matières
