6.2. SafeLink Auto Category 1 (Float Free)
6.2.1. Installation of container
The container should be installed outside on deck or wheelhouse, or against a bulkhead or any vertical and flat
surface and comply with the following instructions:
•
horizontal or vertical position;
•
clear area to allow the beacon to rise the surface, should the vessel sink;
Caution: watch rigging, antenna or shroud that could build obstacles;
•
easy access to the crew for manual operation;
•
strongly fix to the vessel with 4 screws according to drilling mask hereunder.
Note: dimensions are in millimeters (inches in bracket).
Reminder: The instructions plate must be fixed close to the container.
DOC09028A
25