How To Use - GE Profile 22 Manuel D'utilisation

About CustomCool
ExpressThaw
™
ExpressChill
™
6
.
™
(on some models)
How it Works
The CustomCool feature is used to quickly
™
chill items, thaw items or hold the pan at a
specific temperature. This feature is a system of
dampers, a fan, a temperature thermistor and
a heater.

How to Use

Empty the pan. Place the Chill/Thaw tray in
the pan. Place the items on the tray and
close the pan completely.
Touch LED Dispenser Control:
Select the ExpressThaw
or SelectTemp pad. The display and SET
™
light will come on. Tap the pad until the light
appears next to the desired setting.
Use the following chart to determine the
best setting to use.
ExpressChill can be set to 15, 30 or 45
minutes. The default is 15 minutes.
To stop a feature before it is finished:
tap that feature's pad until no options are
selected and the display is off.
Touch LED Dispenser Control
The pan is tightly sealed to prevent temperature
fluctuations in the rest of the refrigerator.
The controls for this pan are located on the
dispenser with the temperature controls.
During ExpressThaw and ExpressChill, the
display on the controls will count down the
time in the cycle (on some models).
After the ExpressThaw cycle is complete,
the pan will reset to the MEAT setting (32°F
, ExpressChill [0°C]) to help preserve thawed items until
™ ™
they are used.
The displayed actual temperature of the
CustomCool pan may vary slightly from
the SET temperature based on usage and
operating environment.
NOTE: For food safety reasons, it is
recommended that foods be wrapped in plastic
wrap when using ExpressThaw. This will help
contain meat juices and improve thawing
performance.