Backlight - Hama EWS-810 Mode D'emploi

Note – Weekday
You can choose from German (GE), English (EN), Danish (DA), Dutch (NE), Italian (IT),
Spanish (ES) and French (FR) for the weekday display.
Celsius/Fahrenheit
• Press the – button (18) to switch between °C and °F for the temperature display.
Alarm
• Repeatedly press the MODE button (15) to access alarm mode 1 or 2 .
A1 or A2 is displayed accordingly in the seconds display.
• Press and hold the MODE button (15) for approx. 3 seconds to set the signal time of the
alarm displayed. The hours display begins to ash.
• Press the + button (17) or the – button (18) to select the hour for the alarm time and
con rm your selection by pressing the MODE button (15). The minutes display begins to
ash.
• Repeat the process to set the minutes for the alarm time.
• Press the MODE button (15) repeatedly to also set the other alarm mode or return to the
time display (12).
• If you do not make an entry for 13 seconds, you automatically exit the setting mode.
• Press the ALARM button (16) to activate/deactivate Alarm 1, Alarm 2 or both. The alarm
symbol (4) will appear/not appear.
• If the alarm is triggered, the alarm symbol (4) will begin to ash and an alarm will sound.
• Press any button (except the SNOOZE/LIGHT button (14)) to stop the alarm. Otherwise, it
will stop automatically after 2 minutes.
• If you press the SNOOZE/LIGHT button (14) during the alarm, the alarm is interrupted for
5 minutes and then goes off again. The alarm symbol (4) will ash.

6.4. Backlight

Note – Backlight
• If you press the SNOOZE/LIGHT button (14), the display will light up for approx. 5
seconds.
• Press and hold the CONTRAST button (19) for approx. 3 seconds and press the + button
(17) or – button (18) to select the contrast of the digits of LCD.
9