Hansgrohe C 04221 0 Série Instructions De Montage / Mode D'emploi / Garantie page 10

10
1.
2.
1.
2.
English
Push the thermostatic mixer sleeve on so that the
indexing mark is at the 12:00 position.
Push the volume control sleeve on.
Install the escutcheon.
Lubricate the adapter stems with a small amount
of white plumber's grease (1).
Install the handle adapters and screws (2).
Tighten the screws using a 3 mm Allen wrench.
Install the volume control handle (1). Tighten the
screw using a 2 mm Allen wrench.
Install the thermostatic mixer handle so that the
safety stop override button is at the 9:00 position
(2).
Tighten the handle screw using a 2.5 mm Allen
wrench.